Chewbacca - Star Wars - HueForge

Hi all! My first Maker World submission.

For this print, I did use a 0.2mm Stainless Steel nozzle but it should work with a 0.4mm. The model is 69.32mm by 98mm in size or slightly bigger then a trading card. 

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm

This print uses 3 unique filaments

Swap Instructions:
    Start with PLA BambuLab Basic Jade White (TD 5)
    At layer #23 (1mm) swap to PLA Overture Matte Light Brown (TD 0.6)
    At layer #40 (1.68mm) swap to PLA BambuLab Matte Charcoal (TD 0.6) for the rest.

May the Force be with you!