R36S Retro Gaming Console Max Grip

The best grip for R36S... Try it!

Boost MePikachu thanks you, if you chose to make this project! ^_^

 

---------------------------------------------------------------------------

 

09/08/2015    Minor changes:

- The two air intake holes have been enlarged (For all profiles).

- Added "Two-Color" printing profile. Logos and designs stand out. 
  (H2D recommended to optimize time and waste)

 

 

---------------------------------------------------------------------------

06/21/2025     Added 20 different Logos-Texts:

- Pikatchu + pokeball
- 1UP
- DOLCE & BANANA
- Bomberman
- Bowser
- The Darth Face
- GameOver
- Older than Google
- Kirby
- Magikarp
- Super Mario Bros
- Mario 8bit
- Megaman
- Pacman
- Don't Panic
- Princess Peach
- Press Start
- Stich
- Yoshi
- Zelda

 

 

Approximately printing times are:
4.5 Hours (with different support material - AMS)
3.3 Hours (Supports of the same material)
12 Hours (Bicolor Version)

---------------------------------------------------------------------------

 

 

Here you can find the rest of the R36S collection:

- Back Buttons:     https://makerworld.com/it/models/250163-better-buttons-for-r36s#profileId-1883096

- Skadis Stand:      https://makerworld.com/it/models/2400521

- R36S Stand: https://makerworld.com/it/models/1776614
 

  

 

 

---------------------------------------------------------------------------

I made this remix making several improvements:

• Pikatchu (..and more) on the back
• Mirrored in half to obtain a symmetrical result
• Added parts in "Fuzzy mode" for maximum grip (object divided into 2 parts!)
• Added shaped hole for USB ports / Audio Jack and air vents
• Redesigned internal housing coupling console (right radius corners and better fit)
• (optional) 2 disks felt Ø 28mm 

 

The fit has been improved. 
Adding also the chair felt, this is the result:

 

 

 

 

 

Which print profile should I choose?!

 

Several print profiles are available. The two-color option is definitely a great option if you own an H2D, or if you're not worried about print time (~12 hours on an X1C).
If you choose single-color, we recommend using the PLA+PETG print profile! 
It doesn't matter if you reverse the material type; it's important to use a different material for the support contact surfaces to ensure a flawless layer underneath!
This is an example. White is matte PLA, while Black is PETG with PLA supports. The photos speak for themselves….

 

 

Boost MePikachu thanks you, if you chose to make this project! ^_^