Stackable Snap Together Pill Boxes

Use my print profile for best results, I cannot guarantee print profiles by others.

Here is a nifty snap together stacking set of pill boxes (50mm x 50mm x 24mm). Each box has an engraved letter(s) of the day.

The lid has a tiny logo, but there is also a lid without the logo as well. There is also a plain box with no days of the week engraved. They have all been printed using Bambu Lab Matte PLA as well as generic PLA and they works fine. Also, printed and tested on X1C, A1 and A1 mini.

If the snap is too tight, try snapping/unsnapping a few times and it will loosen. If still too tight, just use a nail file on the snap nubs to lower the resistance.

This is a Single Color profile for X1C.

There are a number of other print profiles, including multi-color for A1, A1 mini and X1C. The color profiles only have 3 filament swaps for the entire print. Those profiles are set to print each box with the correct filament color, then go on to the next. Because of the print sequence by object, you'll need to print out 2 plates, on for Su,M,T,W and another for Th,F,Sa,Lid.

Let me know if there are any other sizes/designs that you would like.