Cable End Holder for Specialized Ebike Charger

This is a magnetic holder for the end of your Scecialized Ebike charger cable. 

I wanted something that would hold the end of the cable when it was not connected to the bike. The cable has magnets in the end, and would stick to metal, but I was afraid that the connectors would short if i just stuck it somewhere. There is a reces in the bottom, and the print is designed to imbed a standard 7/8" OD washer like this one.

https://a.co/d/0EZ7kBS

You can use any washer with a diameter up to 22.5mm and a thickness less than 2mm. 

I inserted a pause in the print so you can place the washer, and it will be completely encased in the print. Please make sure the washer you use sits completely flush or below the edge of the print to avoid risk of the print head hitting the washer. 

Once you place the washer you can resume the print. . This works fine printed in PLA, but should be ok in any material.