Kanto Region Badge Magnets

Kanto Region Badges designed to be used as magnets or held in a case.

This project will require super glue & magnets:
- I used gorilla glue & 10x3mm neodymium magnets.

The case can be printed as one print. It is important to use supports and let the plate cool down completely before detaching from the build plate. This will allow the supports to detach quite easily from the case.
My suggestion for supports in slicer:
- normal(auto)
- default style
- Rectilinear base pattern
- Top Z Distance 0.25mm

The badges will need supports as well for where the magnets will insert. I originally used tree(auto) slim supports, but the above settings will work too.

With these slicer settings, the supports will remove easily.

WARNING:
If you print the case and it is not closing all the way, I suggest sitting a book on top of it for about an hour and it should close then. This is what I had to do.