Bonsai at sunset - Hueforge

This is 4 colour Hueforge of Bonsai at sunset.

 

I uploaded two sizes 200x200 X1/P1/A1 and size 180x180 for A1 Mini.
And thicker version with no border size 200x200. Swap instructions in profile description.

 

    At layer #25 (2.08 mm) there is swap for black for the black border, but you can change the colour to any you like.

 

Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

 

If you want stand for this print check out my Simple vertical stand.
For my Hueforge pictures with border choose the version with 3 mm gap.

 

If you like this picture, you can look at my other pictures with sunset here in this collection: 

https://makerworld.com/en/collections/8672734-sunset-hueforge

 

Boost MeI print all of my creations myself.
If you like my work, pls send me a boost, it will help me make more.
Feel free to PM me if you have some idea for a nice picture.
Thank you.

 

Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 4
    PLA BambuLab Basic Orange Transmission Distance: 6.4
    PLA BambuLab Basic Sunflower Yellow Transmission Distance: 3.2
This print uses 4 unique filaments

 

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #11 (0.96mm) swap to Orange
    At layer #18 (1.52mm) swap to Sunflower Yellow for the rest.

 

    At layer #25 (2.08mm) swap to Black if you want black border.