Ikea Skadis Display for Star Wars Brick Helmets

I first want to give credit to the original designer for the base of this model https://makerworld.com/en/@kmmonk , he created a one piece screw in wall mount version of this (https://makerworld.com/en/models/402063-star-wars-brick-helmet-display-boba-fett).

I really liked the model but wanted a remixed custom version for my own needs:

• Wanted it for mounting the helmets to an Ikea Skadis peg board.
• As there are 12 Star Wars helmets wanted to be able to print multiples on 1 plate for speed, so I split the features so the bracket and main body are the same for all so you can just print these off in bulk.
• Wanted a customised minifigure base, and also wanted it to fit a genuine standard 4x4 plate to avoid stressing the legs too much if you are concerned with that.
• I also included printable options with fewer pegs in the profile for placement options of accessories.
• Wanted to have the minifigure mount print separately incase of the pegs not fitting nicely due to printer variances you don't have to throw away the whole print.
• I cut out the logos to make them print separately and have the ability to print this with no AMS (for some logos).

Once printed, glue everything together, I did not glue the 4x4 brick mount just so I can swap it if needs, and it is a nice snug fit so does not move anyway.

You can fit 4 side by side (slightly staggered) on a 56cm Ikea Skadis board, and I believe you would need 2x 56x56 boards on top of each other to fit all 12 helmets with some room to spare.

Hope you find this useful and don't forget to checkout the original designers model for a wall mount version of these: https://makerworld.com/en/@kmmonk