Formula 1 LED - Bahrain

Description

Light up your favorite place with this large Bahrain F1 circuit LED!

Boost MeLove F1? Boost this model to help light up all the F1 circuits! 🏎️

Features:

• 45 cm in width!
• Modeled for 12V/5V LED neon strips (6mm width by 12mm height max recommended)
• Clean channel design for smooth LED routing
• Mounting holes for easy wall display
• Optimized for fast and clean printing
• Includes connector pieces to attach the parts together

Recommended Settings:

• Layer Height: 0.25mm (0.4mm nozzle) OR 0.56 mm (with 0.8 mm nozzle)
• No supports needed
• PLA or PETG recommended
• Print time: ~3 hours total (3 plates)
• Auxillery Fan OFF to prevent warping

Assembly Guide:

1. Print each plate
2. Place a light layer of super glue on the inner walls of the connectors and place both ends of the parts inside until dry
3. Cut LED neon strip to size (~1.9m of strip)
4. Solder wire to LED
5. Fit LED into frame. I like to place some hot glue inside to keep it in place.
6. Hang it up using the two holes.