A1 Lubricant & Clean Nozzle for WD40

User Discretion

Please check the Bambu official instruction for WD-40 at the link below 

https://wiki.bambulab.com/en/a1-mini/maintenance/lubricate-y-axis-with-wd-40-multi-use-product

• "WD-40 Multi-Use Product" is strongly recommended
• During the operation, please handle with care and ensure that lubricant does not come into contact with the surface of the textured plate. It is recommended to remove the textured plate from the heatbed during the operation to avoid any contamination, as it will lead to adhesion issues. 

WD40 cap (tube)

All nozzles could share the WD40 cap (tube), the standard WD40 nozzle diameter is 4mm, but i also made an European version 3mm

Y-Axis & Z-Axis

From the left side to right side, just simply change the orientation of the nozzles

Update for Nozzle Cap (2025/11/04)

the design has been improved for better strength. 

it is now printed in the horizontal orientation.