The tripod has an adjustable tilt head and is compatible with the standard 1/4-inch camera mount.
Compatible with my “phone clamp for tripod” design
In its folded state, it occupies minimal space and is easy to carry. It can also be used as a monopod.
This was my first design, and it has now been completely revised. The overhangs have been cleared and the tolerances have been fine-tuned. It can be printed in less than two hours with around 50 grams of filament. It doesn't require supports or additional hardware to print.
For screw tolerances to work right, it must be printed with dimensionally accurate filament. PLA, PLA+, PETG, and HIGH SPEED PETG are recommended.
To increase rigidity, the hinge screw can be replaced with a 45 mm M5 bolt, and the plastic camera mount can be replaced with a standard 1/4-inch metal one, though this is not essential.
Print Settings
It is recommended that you use the 3MF file provided with the design, it is tested.
falconsson
