Trinket /Jewelry Box with Lid Style 1 of 3

Scalable small geometric storage/trinket/jewelry container with lid and decorative octagram star pattern* inside and on bottom. Both a short and tall version of the box are provided- each with either a faceted or smooth interior option in the file. 

NOTE: The lids may have some minor stringing on the inside depending on the dryness and/or settings/calibrations of your chosen filament- as these were easily nipped off and did not interfere with the function when I printed mine, I did not use supports for them as it would have added more time and filament. If you would prefer the supports I have added another profile with supports enabled for the lids.

Also, the lids are intended to be a bit snug, though the texture of the matte PLA in particular may make the lid difficult to remove the first couple times. It should loosen a bit each time and I found that spinning/rotating the lid while on one of the middle pieces or base usually helped mellow the seams and reduce extra friction fairly easily. If that doesn't work will enough, you can also considering doing some minor sanding- but don't overdo it or the lid may become too loose.

If you like this trinket box/container and/or the geometric style, there are many more models from this series on my profile page!

*Provided print profile has specific by-object settings to ensure the decorative detail prints properly- please note that the star pattern will not show on the plates until you slice it. Dual or tricolor filaments are recommended for best visual results as single color or gradient filaments will not produce the same multi-color faceted effects as shown in the pictures. The models shown were printed in Ziro tricolor matte filaments.