Pokeball Candy Dispenser

Boost MeBoosting helps creators out achieve great things! Please consider a boost to this model if you like what you see!

Why just carry pokemon in a pokeball when you can carry something sweet! Simply give it a shake, press the front button and a tasty snack appears! 

Set up to print as parts its very easy to assemble! The connecting of the parts can be tight but once together they will never fall appart. 

 

Assembly

 

First place the spring mech into the bottom section of the pokeball. 

Second, place the middle section of the pokeball over the 3 pins slotting the mech through the hole. This will be tough but with enough force, will push down. (printed upside down to allow ironing to make it smooth as possible) 

Third, Repeat this with the top section of the ball, pushing down as hard as possible to slid it all the way down the pins. 

 

 

Fouth, Line the white push button up with the hole in the front/ the mech and push it in. It should hold in place but also might require a tiny drop of glue just to secure. 

Fifth and last but not least, Fill it using the rear hole and close the lid, Simply press the button and the candy will drop through the hole! It's as easy as that. 

 

Size wise this is set up for things like skittles, TicTacs and M&Ms. I have uploaded the raw files incase you require seperate peices or a resize. 

 

 

This is not associated with any companies. This is a fan art peice only!

Please do not sell or distribute my 3d files both digital and physical print. If you would like to do so, commercial licenses are available via my Patreon page. 

THIS FILE DOES NOT FALL UNDER MY COMMERCIAL LICENSE, THIS IS FOR PERSONAL USE ONLY AND ALL RIGHTS ARE WITH RESPECTED COMPANIES.