Pipette Combo 移液器套装

English: This pipette set includes: 1) an adjustable pipette (0-5 ml range, with 0.5 ml increments), 2) pipette tips, 3) a pipette tip rack, and 4) pipette stands (2 sizes). While suitable for basic liquid transfer tasks, this set is not intended for professional use. The 3D-printed pipette may not be easily calibrated, and its long-term reliability has not been established. Assembly will require two OD 14*2.4 mm O-rings, one OD 18*2.4 mm O-ring, rubber bands (number depends on the elasticity of the rubber bands; I recommend using 2 1.4x20 mm rubber bands available on the Bambu Lab Store as individual parts or from the Maker's Beginner Kit), and some lubricant grease (silicon-base is recommended, can also be found on the Bambu Lab Store).

中文：此移液器套装包括：1）可调移液器（0-5 ml范围，增量为 0.5 ml），2）吸头，3）吸头盒，4）移液器支架（2种尺寸）。此移液器可用于基本的液体转移任务，但不建议用于专业场景。3D打印的移液器很难校准，且长期可靠性还有待验证。组装需要用到2个OD 14*2.4 mm O型圈, 1个OD 18*2.4 mm O型圈, 橡皮筋 (具体数量因橡皮筋的弹力而异，我推荐使用2根拓竹商店有售的1.4x20 mm 橡皮筋（单买或者用创客宝库新手礼包里的），以及一些润滑脂（推荐使用硅脂，拓竹商城亦有售）。

English: I uploaded 5 print profiles:

1. Pipette: the pipette, printed in 2 colors by plates
2. Pipette Tips: 3 replacable pipette tips
3. Pipette Tip Rack: a rack that can hold 9 tips, handy when performing single-handed operations
4. Large Stand: a large pipette stand that can hold 2 pipettes next to each other
5. Small Stand: a smaller pipette stand that can hold 1 pipette

中文：我上传了5个打印配置：

1. 移液器：移液器主体，双盘分色打印
2. 吸头：3个替换移液器吸头
3. 吸头盒：可放置9个吸头，单手操作移液器时会很实用
4. 大款支架：可同时放置2个移液器
5. 小款支架：可放置1个移液器

English: Note: When adjusting the volume rings, slide them gently and avoid pressing them into the opening. If the rings become loose, simply snap them back into place.

中文：注意：使用移液容量调节环时，请平移，避免将其按入开口。如果调节环松动，可将其重新卡回原位。

English: Feature Highlights

中文：功能亮点

English: Assembly Instruction

中文：组装指南

English: Hint: You can highlight the numbers on the volume adjustment rings with markers to make them clearer.

中文：提示：您可以使用标记笔描一遍容量调节环上的数字，以使其更加清晰。