Beautiful Hawk with Light Wings

Summary

A friend of mine send me an image of one of the low poly eagle lamps. After discovering that the model is very expensive I desided to design my own hawk lamp but better with cocaine & hookers. Yes & here I am. Proud of my very own hawk lamp.

https://youtu.be/mG2bOl0ojMg

Print Settings

• Printer brand:

  Anycubic

• Printer:

  Photon Mono M5s

• Rafts:

  Yes

• Supports:

  Yes

• Resolution:

  0.5mm

• Infill:

  no

• Filament brand:

  Anycubic

• Filament color:

  white

• Filament material:

  Plant-based resin

Post-Printing

Electronics

You need two LED modules, a battery holder & a battery to finish the lamp. For the LEDs I added markers where the LEDs of the LED modules are supposed to be placed. Also there is a screw hole for the battery holder.

As the lamp operated switch-less I wrapped around the battery some tape & formed a latch with the tape. This way you can easily remove the battery to turn off the lamp. You can even put the battery half way in the battery holder & the battery holder will still hold the battery even when the lamp is turned off.

1. 2 x LED Modul SMD2835 DC12V
2. 1 x 23A 12V Battery Holder
3. 1 x 23A 12V Battery

How I Designed This

Blender & Ray Tracing

I designed the model with Blender & simulated the Model with ray tracing to test my design.