Lotus LED Tea Light Holder

This elegant, lotus flower inspired tea light holder is designed to hold an LED tea light up to about 40mm in diameter. The tea light hangs from an arm, creating a nice and stunning look.

Assembly:
    1.    Print all the parts (note: the base has a big overhang, which might not print perfectly depending on your environment and filament. Since it’s facing the bottom, it’s not a big deal if it’s not perfect).
    2.    Assemble the round light holder with the bow. Add some glue into the holes and push the bow in. It should hold by itself, but glue makes it more secure.
    3.    Insert the arm into the base. If you feel it’s too loose, you can also apply some glue here.
    4.    Insert the LED tea light into the holder and hang it onto the arm.
    5.    Enjoy your new LED tea light holder!

PS: This was my first model created using Blender. It was a nice learning experience, but also a bit frustrating, especially if you’re used to normal CAD. However, I like the results, so I wanted to share the model.
 

As always, feedback is greatly appreciated and I’ll try to improve the design as needed. Thank you!