HueForge - Zach from Hotline Miami

I thought I would try to create a hueforge of Zach from hotline miami, I think it turned out pretty good.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Don't change the print size otherwise it will mess with the layers

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA BambuLab Basic BambuLab Green Transmission Distance: 8

PLA+ Sunlu Pure Yellow Transmission Distance: 5

PLA+ Sunlu White Transmission Distance: 5

PLA+ Sunlu Pure Yellow Transmission Distance: 5

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to BambuLab Green

At layer #16 (1.36mm) swap to Pure Yellow

At layer #19 (1.6mm) swap to White

At layer #21 (1.76mm) swap to Pure Yellow for the rest.