AMS HT 20 Degree Angled Stand

This is a model specifically designed to work with Merlin2K's “AMS 2 PRO angled Shelf Mount” available here:

https://makerworld.com/en/models/1327540-ams-2-pro-angled-shelf-mount-with-screws?from=search#profileId-1365181

Although AMS HT has similar overall dimensions to the PRO unit in body height and depth it is a completely new design so my solution was to make a tray for it and lock the two stands to that.

I didn't include screw holes … to be honest I forgot! but this is because I didn't use them myself on the other stands, just some grippy plastic feet instead. If anyone wants me to make some screw holes please drop a comment.

Printing is easy and assembly is just push fit. You may want to add some superglue adhesive to hold the runners more tightly to the tray but I didn't use any in my photos.

I made stays for my specific use to hold the AMS PRO 2 lids open:

https://makerworld.com/en/models/1492231-a-lid-hold-open-stay-for-the-bambu-ams-pro-2#profileId-1559955

I will probably make another for this and will update here if and when I do.

UPDATE:

I have uploaded the HT version of the shelf stay to the AMS PRO 2 Model.

UPDATE2 30-09-25:

Added a version of the bases in the STL files with screwholes :)

IMPORTANT!

Update 3 21-11-25:

Updated the base to allow for the bottom vent! I had completely missed it somehow during the design process.
If you already have a base and don't want to print another drill a 12-15mm diameter hole, 69mm up from the inner edge of the front part of the base and dead central across the width (51.5mm from the right or the left side). Ideally use a Forstner bit.