Morgan Wallen - I'm the Problem

Morgan Wallen - Im the Problem

 

For more fanart albums check out my profile → https://makerworld.com/en/@Noahs_A_Noobie/upload

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x199.69mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

 

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #9d432c PLA BambuLab Basic Brown  Transmission Distance: 2
    #e7ceb5 PLA BambuLab Basic Beige  Transmission Distance: 8
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

 

(IGNORE IF USING AMS)

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Brown
    At layer #15 (1.28mm) swap to Beige
    At layer #23 (1.92mm) swap to Jade White for the rest.

 

Boost MePractice boosting models here!