Clothes Dryer Fix (No Hardware Required)

A part for repairing a dryer with a broken rod.
The part does not require any additional hardware and is printed without supports.
 

How to use:
  1. Measure where you want to bend the rod (near the hole in the plastic part).
  2. Use the back of the printed part to bend the rod.
  3. Insert the bent part into the part and snap it onto the pipe after turning it.

Dimensions:

• Pipe = 14 mm

• Rod = 2 - 3 mm

  If your dryer has other sizes, let me know and I will add models with the sizes you need.