Description
Print Settings:
- Printer: Bambu Lab A1
- Layer Height: 0.2mm
- Initial Layer Height: 0.2mm
- Wall Count: 2–3
- Infill: ~10%
- Seam: Back
- Supports: Required (enabled for overhangs like the “hands” and sign edges)
- Build Plate: Textured PEI
- Print Time: ~1h33m
- Prepare & Timelapse Time: ~6m
- Total Time: ~1h40m
- Total Filament: 28.92g
- Filament Cost: $0.71
AMS Color Slots:
- Slot 1 (Black): 7.47g
- Slot 2 (Green): 2.60g
- Slot 3 (White): 7.50g
- Slot 4 (Red): 11.52g
- Filament Change Times: 33
Material:
- PETG recommended for long-term outdoor use.
- PLA is suitable for short-term or shaded/dry environments but may degrade in sun/rain.
Notes:
Model lays flat and is optimized for multicolor AMS printing, but works fine in single color if you prefer to paint. A fun and sturdy garden label, part of a growing set.
3forks
