Multi Material Elite Series 2 Sticks

After much tweaking, these Elite 2 sticks are finally ready.  Using the dual nozzle capabilities of the H2D, you can print extremely high quality multi-material thumbsticks.  The inner frame is PLA while the topper is TPU for an excellent soft and grippy feel.  Referring to the pictures, the black toppers are Bambu TPU 95A HF, the white toppers are Bambu TPU 90A.

Comes in 3 sizes, 10mm, 12mm, and 13.5mm

I recommend printing a max of 2 at a time to ensure you have all the settings right.  It's almost 2 hours to print 2 sticks on the H2D, 0.08mm layer height of course.

Support Removal - Refer to the pictures, use fingers to pry thumbstick out from the bottom.  Needle-nose plyers are perfect for pulling out the supports from the inside.

I can confirm these ARE printable on P1/X1/A1 with TPU for AMS, it just takes at least twice as long, depending on how you do the supports.  But TRUE TPU is the way to go for sure if the option is available.  I have included separate models for X1/P1/A1 users, due to spatial accuracy being different enough between the H2D and the others.