June 12, 2025
Description
Hueforge of Avatar poster
The photos shows the result in 200*143mm and a nozzle of 0.4
You can change the X and Y dimensions but do not change the Z dimensions
You must define the printing parameters indicated in the description below and change the filament on the indicated layers.
You can use filaments other than those indicated, but the result will differ.
You can use any black PLA
Hueforge description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
The Model is 143.43x200mm in size
You may print at higher layer heights below the Base Thickness of 0.68mm
The Max allowed Thickness is 2.44mm and the Actual Thickness is 2.36mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#00358e PLA BambuLab Basic Blue Transmission Distance: 4
#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 5 unique filaments
Swap Instructions:
Start with BambuLab Basic Black
At layer #16 (0.8mm) swap to BambuLab Basic Blue
At layer #19 (0.92mm) swap to BambuLab Basic Cyan
At layer #28 (1.28mm) swap to BambuLab Basic Jade White
At layer #41 (1.8mm) swap to BambuLab Basic Cyan
At layer #45 (1.96mm) swap to BambuLab Basic Yellow for the rest.
License:
Standard Digital File License
Altf4-Formation
