Hey!
Check out my refined karambit design! i hope you enjoy it as much as i do.
- 100% printed, no extra material needed,
- AMS not needed,
- Recommended filament: Silk PLA, PLA, PLA+
- It is friction fit, no glue needed (unless you wish to use). Different filaments have different expansion rates. So to ensure friction fit, I prepared several pinsets with different offsets. test prints showed that 0 offset and 0,1mm offset are the most suitable for friction fit, so these two are ready in the 3mf file. Choose the one that is convenient during assembly. If these pinsets are too thick you can try pinsets with higher offset in the extra folder.
- 1 Karambit+stand can be printed with 55grs of filament 2 hours 20min. Can be printed faster if printed on a single plate with single color (who would want that anyway…)
May the perfect first layer be with you, see you on the next design!
falconsson
![Retracc: The Retractable Karambit Knife [Now With Magnets!!] preview image](https://wsrv.3dprinterfiles.com/?url=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/56/fb/d1/98/6b/Documents.png&w=292&h=219&fit=contain&cbg=white&n=-1&w=640&h=640&output=webp&q=100&n=40&default=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/56/fb/d1/98/6b/Documents.png&w=292&h=219&fit=contain&cbg=white&n=-1 "Retracc: The Retractable Karambit Knife [Now With Magnets!!] preview image")
