1:64 Diecast EXPANDABLE parking lot - AMS

Apart from having an addiction to cars i absolutely have a space for diecast. I wanted to make a model that can house up to 12 cars thats also expandable! Heres my AMS required parking lot that prints face down to get the “road” texture and is also fairly quick and cheap in material! You can chose to expand it length wise or stack 2 of them top and bottom and make a big parking lot! 

**PLEASE MAKE SURE YOUR PRINT BED IS CLEANED THOROUGHLY BEFORE STARTING THE PRINT. Do auto levelling to be sure.

**WAIT FOR MODEL TO COOL AND WATCH THE BED TEMP TILL ITS 40 DEGREES CELCIUS OR LESS! And then you can remove it

 if you try to peel it off while warm its not gonna be flat and may warp. 

dimensions is approx 230mm x 250mm making use of the whole bed as much as i can

Preferably this works best with Matte black PLA, as those seem to warp the least after it cools.  

This is just the start of my dioramas, follow and boost me to keep me going for more!

Here is a link to the p1s version!

 https://makerworld.com/en/models/2067222-p1s-compatible-1-64-diecast-expandable-parking#profileId-2232424