Chainsaw Man - Power - Stylized Poster

Boost MeBoosts help me to make more designs like this.  If you enjoy this poster, please consider giving me a comment, like, or boost! :)

Hueforges can be resized by adjusting only the X and Y scale—leave the Z height unchanged for best results.
 

Hueforge art inspired by Power from the Chainsaw Man Manga

Each print is 133x200mm

These prints display wonderfully with a 3d printed HueForge stand, such as the middle size shown here (as shown in the print photos):
https://makerworld.com/en/models/153050-3-collapsable-stand-sizes-hueforge-etc?from=search#profileId-167215
 
Project: Chainsaw Man Power.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

The Model is 133.15x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm
 

Filaments Used:

• PLA BambuLab Basic Black Transmission Distance: 0.6
• PLA BambuLab Basic Basic Blue Transmission Distance: 4
• PLA BambuLab Basic Red Transmission Distance: 4
• PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments
 

Swap Instructions:

• Start with BambuLab Basic Black
• At layer #8 (0.72mm) swap to BambuLab Basic Blue
• At layer #13 (1.12mm) swap to BambuLab Basic Red
• At layer #18 (1.52mm) swap to BambuLab Basic Jade White for the rest