Zoro - Hueforge One Piece

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 112.48x200mm in size
You may print at higher layer heights below the Base Thickness of 0.6mm
The Max allowed Thickness is 2.36mm and the Actual Thickness is 2.36mm

Filaments Used:
    #000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6
    #949995 PLA Sunlu  Silver  Transmission Distance: 3.5
    #00f52c PLA Sunlu Green  Transmission Distance: 6
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #8 (0.76mm) swap to Silver
    At layer #11 (1mm) swap to Green
    At layer #20 (1.72mm) swap to Jade White for the rest.