Bobby Hill "That's My Purse..." Lamp

As a King of the Hill enjoyer who is looking forward to the new season, I had to design this memorable moment as a lamp for myself and my friends.

Prints face down without supports. Some assembly required, the first plate is four colors and doesn't include the shirt piece, which is on the second plate and glues into place from the inside. I have also included a backplate (Plate 3) and diffuser (Plate 4). The diffuser is optional, but will need to be glued into place if you decide to print it.

You can use the Bambu Lab branded LED strip, or any generic wall outlet-powered adhesive LED strip, as the light source.

For mine I used this inexpensive strip from Walmart that I cut shorter. It takes approximately 30 inches of LEDS to run around the inner edge of the black border so make sure you get a strip you can cut shorter. There is an opening in the lower back of the backplate to accommodate for the cord.

Filaments used are BambuLab Matte Charcoal and Ivory White as well as Kingroon Skin, Yellow, and Blue.

Checkout more of my designs via my profile or via the links below!