Comfy Angled Grip for Joy-Con 2 Controllers

✅ Less support material to remove

❌ Requires more screws

✅ Slightly better fit

❌ More support material to remove

✅ Requires less screws

❌ Slightly worse fit

Step 1:

3D print the parts and acquire the magnets and screws.

Make sure to remove the supports!

If you printed the single part version, make sure you've removed 100% of the support material. If there's any leftover support material it may scratch your joycons.

Step 2:

If you printed the multipart version, assemble the main body using the M3x8mm screws. I also recommend adding superglue between the parts.

Step 3:

Place the magnets inside the grip.

Step 4:

Screw the back cover into place over the magnets.

Alternatively, you can use glue.

Step 5:

Attach Joy-Con 2 Controllers

One-Hand Grip for Joy-Con 2 Controllers

This 3D-printed grip holds two Joy-Con 2 controllers close together, enabling one-handed control of both.

Simple Grip for Joy-Con 2 Controllers

This 3D-printed grip is the same size as the official Joy-Con 2 controller grip, but without the rear handles.

Accessible Grip for Joy-Con 2 Controllers

This 3D-printed grip places both Joy-Cons as close together as possible to allow for easier use with one hand.