Pool skimmer mount MK2 for Intex / Bestway pools

Pool skimmer mount MK2

 

A Simple Mount for your pool cleaning tools to be stored in neatly and still have easy assess to them. The MK2 was made after see that the screws on the first version had started to rust after just a few days. This version need no additional hardware and I refined the design to be less squarer looking.

 

This model is made to fit Pools with round frame poles with a cross section sizes of 38mm & 1.14 inches . If you have different size frame poles send me a message with what size you need and i will make it. 

 

Update: At the request of follower i have also made this to fit oval poles. But as i do not have a pool of this type to test it i have not printed it  thus the photo on the profile is of the round version. 

 

Something to note:

 

Depending on your printer calibration you may find the threads to be tight so i recommend testing the fit first maybe screwing them in and out a few times. please remember the screws are printed vertically so the layers make them somewhat weak do not over tighten them or they will brake. 

 

If it will not work for you at all you can use the previous version of this model that uses normal M4 screws you can find it here 

 

Boost MeIf this is useful to you then a boost is a good way to say thanks.