June 22, 2025
Description
A simple solution to fill tubs without holding the house or the chance that your hose will jump out of the tub. the Model is designed to print with minimal supports (only support for the gardena coupler is necessary for a good fit).
The large diameter of the inner tube vs the intake coupler size is to reduce the pressure and results in a tools that stays in place while filling your tub.
In the second Print profile you will find additional sizes: 70mm, 100mm, 150mm and the original→ 50mm
If you rather connect your hose with hose clamps and a barbed nozzle you can use my 1/2 inch hook over here: Barbed nozzle tub hook
License:
Standard Digital File License
TEA - The Extrusion Addict
