Ring Camera with Solar Panel Mount

First off, after some research this should be printed in ASA if you have it. I didn't have that as of now so I printed in ABS for now going to see how it lasts. Sorry for needing hardware to make this, I normally try to make my prints just using printed parts but wanted this one to be secure .

I'll leave links in the attached PDF to everything needed to use this including the solar panel, ring camera, and bolts. Only other piece used was zip ties because this has a long chord. If you really wanted to you could shorten the chord and re-solder it to length but I'm personally not trying to deal with all that.

The camera mount gets bolted to the printed mount with (2) 8MM M3 bolts with (2) M3 washers. The Solar Panel gets bolted to the printed mount with (1) ¼ 20 Bolt ½" Length and (1) ¼" Washer. To mount the printed mount to the house I used (1) T20 Deck Screw 2 ½" length, but you can use whatever you've got laying around as long as its outdoor rated. If your concerned about it getting stolen let me know and I'll come up with a more secure way to mount it.

If you have any questions at all please feel free to leave a comment and I will get back to you, thanks for checking this mount and I appreciate and feedback!