Moza Shifter & E-break mount - playseat challenge

Boost MeIf you find this model useful, please consider boosting and or liking it, to help other people find it more easily!

A mounting option for Moza's H-pattern shifter and handbreak for the Playseat Challenge.

A user has confirmed that this model also works on the Playseat Challenge DD 
(you might need to mount it a little lower, according to the user)

________________________________________________________________________________________________

Screws required:

 

8  M4x40mm

 

4 countersunk M5x30mm

________________________________________________________________________________________________

 

 

The holes for the nuts used for the M4 screws are a bit small so you might have to hammer them in (no need to hit hard).

 

Some tape on the inside walls where it mounts to the seat is ideal for the most robust mounting.

 

The model in the pictures is a bit different to the model you can download. The 2 cutouts where the plate mounts to the main part have been enlarged for easier access.

 

---- Big UPDATE----

Right hand drive is now available!

---- SMALL UPDATE 1----

I've added a smaller mounting plate for A1 mini users so you too can print this. 

just note that it only allows for the shifter to be mounted!

 

Also figured out how to update the “download 3mf” file, so it should be the full list of items

 

---- SMALL UPDATE 2----

the holes for the m4 bolt heads have been enlarged, do to not fitting all types of bolt heads.

So if you have experienced this, it has been updated now and shouldn't be an issue anymore