One Piece - Monkey D Luffy Wanted Poster

Boost MeBoosts help me to make more designs like this.  If you enjoy this poster, please consider giving me a comment, like, or boost! :)

Wanted – Dead or Alive!"

Bring the world of One Piece home with Monkey D. Luffy’s wanted poster, capturing the look of the Marine-issued bounty posters seen in the anime and manga.
 

Perfect for fans of the Straw Hat Pirates, this piece makes an excellent display for desks, shelves, or walls.

 

Hueforges can be resized by adjusting only the X and Y scale—leave the Z height unchanged for best results.
 

Hueforge art inspired by Power from the Chainsaw Man Manga

Each print is 133x200mm

These prints display wonderfully with a 3d printed HueForge stand, such as the middle size shown here (as shown in the print photos):
https://makerworld.com/en/models/153050-3-collapsable-stand-sizes-hueforge-etc?from=search#profileId-167215
 
Project: OnePieceWantedLuffy.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

The Model is 133.07x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm
 

Filaments Used:

• PLA BambuLab Basic Black Transmission Distance: 0.6
• PLA BambuLab Basic Matte Dark Brown Transmission Distance: 2
• PLA BambuLab Basic Yellow Transmission Distance: 6
• PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments
 

Swap Instructions:

• Start with BambuLab Basic Black
• At layer #8 (0.72mm) swap to BambuLab Matte Dark Brown
• At layer #11 (0.96mm) swap to BambuLab Basic Yellow
• At layer #13 (1.12mm) swap to BambuLab Basic Jade White for the rest