Cartel "Wanted" de Luffy | One Piece Fan Art

Boost MeIf you like this model, boost it for free! It helps me a lot and means a world :D Thank you so much!

Love this design? 💖

If you enjoy this aesthetic, please consider supporting my new project, KamiMarks!

 

While this design looks good here, if you want a printed one (that looks much better), you can find them at KamiMarks. 

 

And it's not just bookends! You'll also find bookmarks, book trackers, and more accessories for your manga, books, and shelves!

"Wanted” poster of Monkey D Luffy | Fan Art 👒

Panel and a stand to place it vertically are included.

• Thickness of the panel: 3 millimeters.
• Dimensions: 240 x 160 x 3 millimeters.
• Weight: ±100 grams.

Can be printed without AMS by adding the pause in the layers shown below and changing the filament, although it is much easier using the AMS.

 

Can be printed with a 0.4 mm noozle. Actually, the file is optimized for 0,4 mm noozles.

 

Three colors are needed for the figure: black, dark gray, and white.

 

Double-sided tape or any type of adhesive suitable for walls can be used to stick the panel to the wall.

 

Printed and verified using PLA Recyled from Smart Materials:

• Black
• Dark gray
• White

Can I sell this bookends? ⛔

No, you cannot. 

Recommended print settings 🖨️

• Perimeter generator: Arachne
• Layer height: 0,2 mm
• Perimeters loops: 1
• Top layers: 1
• Bottom layers: 1
• Top layer pattern: Monotonic
• Bottom layer pattern: Monotonic
• Infill Density: 100%
• Infill pattern: Rectilinear
• Solid inner infill pattern: Monotonic
• Platform Adhesion: None
• First Layer: 50 mm/s
• First layer infill: 105 mm/s
• Outer perimeter: 200 mm/s
• Inner perimeter: 300 mm/s
• Low dense infill: 270 mm/s
• Inner solid infill: 250 mm/s
• Top solid infill: 60 mm/s (this one is key!)

Colours swaps 🎨

• Start with black
• At layer 11 (2,2 mm) swap to grey/silver.
• At layer 13 (2,4 mm) swap to white for the rest.