Spongebob Squarepants | Bikini Bottom Diorama

Boost MeLike my model? Feel free to leave me a BOOST :)

This is a diorama of the well-known bikini bottom from the SpongeBob SquarePants cartoons. You do need an AMS(-LITE) to print this diorama. To save filament, I have separated some parts so that you can attach them later using glue. The photos in the description show where each part should go.

 

NOTE: I used 3DLAC-spray for better adhesion because some parts are pretty small.

 

ASSEMBLY INSTRUCTIONS

1. Press the Krusty Crab sign into the hole on the base.

2. Put some glue on the house of Patrick and align it with his path.

3. Put some glue on the door on Octo's house and put in the brown door part.

4. Put some glue on the house of Octo and place it in front of his path.

5. Put some glue in the chimney hole of SpongeBob's house and press the chimney in until the glue has hardened.

6. Put some glue on SpongeBob's door and align it to the middle of his house.

7. Sort the windows of SpongeBob's house as shown in the picture.

8. Glue them against SpongeBob's house (It is a bit hard to do).
9. Put some glue on the house of SpongeBob and align the door with his path.