Frank Ocean - Channel Orange

Frank Ocean - Channel Orange

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x199.69mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #ff6a13 PLA BambuLab Basic Orange  Transmission Distance: 5
    #0078bf PLA BambuLab Matte Marine Blue  Transmission Distance: 0.5
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

(IGNORE IF USING AMS)

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Orange
    At layer #22 (1.84mm) swap to Marine Blue
    At layer #23 (1.92mm) swap to Jade White for the rest.