SkyLoop V1 – Returning Boomerang

SkyLoop V1 is a 3D-printed returning boomerang designed for stable flight and reliable return. With a symmetrical design and optimized airfoil geometry, it offers a smooth and satisfying flying experience. Great for outdoor fun, light sports, or just showing off your 3D-printed skills!

Designed in Shapr3D, this boomerang measures 214mm x 216mm x 4mm and weighs approximately 32g when printed with PLA. It performs best in low-wind outdoor environments and returns beautifully when thrown properly.

How to Throw (Updated Based on Actual Use)：1

Pinch the bottom tip of the boomerang with your thumb and index finger

Flat side faces outward, top tip points forward

Hold it at a 45° angle

Face slightly into the wind and use a snapping wrist motion to throw

Ideal for use in moderate wind, produces a wide returning arc

How to Throw (Updated Based on Actual Use)：2

Hold the boomerang vertically, with the flat side facing your body

Curved edge points outward, stand at a 45° angle to the wind

Slightly tilt the boomerang away from vertical

Use a quick wrist flick to throw

Best in light or no wind, gives more precise control for beginners

 

Safety Warnings:
Only use in open, outdoor areas, away from people, pets, and breakable objects.

Do not throw the boomerang toward people or animals.

Do not try to forcibly catch the returning boomerang if you are not experienced—it can cause injuries due to its spinning motion and edge velocity.

Let it land gently near you if you're unsure how to catch it safely.

Children should use under adult supervision.

Avoid use in high wind conditions.