June 26, 2025
Description
Spirit Level Holder
4-part holder consisting of the upper and lower holder housing + spacer.
(Spacer currently only available at 30mm height; a different height can be created if required; just send me an Message.)
The holder can be attached to a flat wall or a sloping roof. Removing the spirit level is very easy.
The spacer can be screwed to the wall using 4 screws.
After alignment, the housing can be secured using a cylinder head screw and M5 threaded bushing or a countersunk head screw and the countersunk washer available in the print file.
The holder is designed for the "Stabila Type 70" spirit level (which has a cross-section of 50 mm x 20 mm).
The opening is 60 mm x 25 mm, so other spirit levels should also fit through. Otherwise, a custom size can be made upon request.
BR TECHNIX
License:
BY-NC-SA
88
BRTechnix
