picatchu

Project: pcatchu.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 137.14x240mm in size
You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 3.28mm and the Actual Thickness is 2.88mm

Filaments Used:
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
    #8e9089 PLA BambuLab Basic Gray  Transmission Distance: 2
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #00aaff PLA Generic bleu clair  Transmission Distance: 4
    #40e0d0 PLA Bambulab Basic Turquoise  Transmission Distance: 5
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
This print uses 8 unique filaments

Swap Instructions:
    Start with Jade White
    At layer #8 (0.72mm) swap to Gray
    At layer #10 (0.88mm) swap to Black
    At layer #11 (0.96mm) swap to Blue Gray
    At layer #15 (1.28mm) swap to Red
    At layer #20 (1.68mm) swap to bleu clair
    At layer #24 (2mm) swap to Turquoise
    At layer #25 (2.08mm) swap to Yellow
    At layer #31 (2.56mm) swap to Red
    At layer #35 (2.88mm) swap to Jade White for the rest.