Iron man

Project: iron man 4.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 122.33x240mm in size
You may print at higher layer heights below the Base Thickness of 0.72mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #8e9089 PLA BambuLab Basic Gray  Transmission Distance: 2
    #e7ceb5 PLA BambuLab Basic Beige  Transmission Distance: 8
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
    #ff6a13 PLA BambuLab Basic Orange  Transmission Distance: 7
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Red
    At layer #13 (1.12mm) swap to Black
    At layer #14 (1.2mm) swap to Gray
    At layer #16 (1.36mm) swap to Beige
    At layer #18 (1.52mm) swap to Jade White
    At layer #20 (1.68mm) swap to Orange
    At layer #21 (1.76mm) swap to Red for the rest.