Raspberry Pi Zero 2W pwnagotchi Case

Raspberry Pi Zero 2W “Pwnagotchi” Case – For Waveshare e-Paper + X306 UPS

This rugged, snap-fit case was designed specifically for Raspberry Pi Zero 2WH builds with the Waveshare 2.13” e-Paper HAT+ and Geekworm X306 V1.3 UPS module (with a single 18650 battery). While commonly used for Pwnagotchi projects, this is a general-purpose enclosure perfect for portable Zero builds.

What’s Included:

The model includes 3 separate parts:

• Main body (bottom) – Securely holds the Pi, UPS module, battery, and e-Paper display
• Top lid – Available in different versions (see below)

• Power button – Small snap-in button to power on the X306 UPS (print with brim)

   

Versions:

• Ver. A – With e-Paper Display

• Top lid has a cutout for the 2.13” e-Ink display
• Additional venting for airflow

• Ver. B – Without Display

• For builds that don’t require the e-Paper screen

• Includes two top lid styles:

   • One with small side vents

   • One with full hex vent pattern (placed on a separate plate due to the print by object setting for a multi color print)

Ports & Access:

• Cutouts for X306’s USB-C charging port and Zero 2WH’s data micro-USB port
• Power port on the Pi is covered for safety – Geekworm warns against using it on some UPS versions (v1.1); v1.3 is unclear, so this is a cautious design choice
• Power button included to easily control the UPS module

Printing Notes:

• Material: PLA
• Layer height: 0.2mm
• Nozzle: 0.4mm
• Walls: 2 loops | Top/Bottom: 3 layers
• No supports needed
• Snap-fit assembly – no screws or glue
• Designed for “print by object” workflow for easy multi-color printing
• Don't forget to remove the unused top lead variation in the ver. B profile to save on print time and filament

P.S. You might also like my other Raspberry Pi case designs:

• Raspberry Pi 5 Case (snap-fit, 3-part)
• Zero 2W Slim Case (snap-fit, screw-optional)
• Zero 2W / 2WH Case (robust snap-fit, keychain-ready)
• Zero 2WH Vertical Slide-In Case (TPU bumpers + e-Paper)