SCRAPTOR 150g Antweight Cyberbrick Combat Robot

Boost MeFOR MORE AWSOME MODELS

🤖⚔️ EPIC ANTWEIGHT COMBAT ROBOT – READY FOR BATTLE! ⚔️🤖

Conformal to 150g, 10cm³ regulations, running exclusively on the CyberBrick Ultimate Hardware Kit - ZK003 from BambuLab!

      📜 ANTWEIGHT REGULATIONS COMPLIANCE:
✅ Max Weight: 150g
✅ Max Size: 10cm × 10cm × 10cm (10cm³)
✅ Regulated Electronics – No overpowered components!
✅ Mandatory On/Off Switch – Safety first!
✅ No Liquids, Fire, or Entanglement Weapons – Fair play only!

 

MembershipJOIN THE BAMBOTS PROGRAM

🚜🚧SCRAPTER🚧🚜

Push, flip, and dominate with this aggressive wedge bot!

 

      🔥 KEY FEATURES:

✔ Lifting Bot – Ragdoll your opponents all around the arena!

✔ Flipper – The lever doubles up as a Lifting and Flipping tool!
✔ Flippable – Use the Lever when upside-down to Flip back up!

✔ High-Grip Tires – Maximum traction for unstoppable control!
(this build requires 3 360° sevos in total)
one extra sevo for the CyberBrick Ultimate Hardware Kit - ZK003
or two extra servos for the CyberBrick Beginner Hardware Kit - ZK004

      🛠️ Effortless Assembly – Ready for Battle in Minutes!

 

This print-in-place model is designed for quick and hustle-free assembly. Simply follow these steps:

 

1. 🚗 Print the Model
   • Print the components using your preferred filament type—no supports or complex post-processing required.
2. 🔌 Wire Management
   • Connect all electronics packing all the cables tightly in the avaliable space.
3. ⚡ Install Electronics
   • Place the receiver in place (no screws needed).
   • Place the battery in place (no screws needed).
   • Fix the on/off switch in its designated position (with an M2.5 screw).
4. ⚙️ Attach Components
   • Mount the CAM wheel onto the servo motor (make sure the servo motor arms are trimmed to the CAM's circumference) .
   • Screw the CAM servo in place.
   • Screw the wheels to the servo arms.
   • Place the wheel servos in place.
   • put a piece of filament into the hinge after installing the lever in place.
5. 🔩 Secure the Chassis
   • Close the robot’s body and fasten it cover with 4* M2.5 screws.
   • Glue the “3 spring base” or “4 spring base” to the robot and  to the Lever.
   • Place the 6  or 8 springs (2 cocentric springs in each hole).

To recharge the battery, unplug the cable connecting the switch and the reciever  and make sure the switch is on to charge!

✅ Done! Your combat robot is now arena-ready.
 

Check other models here

https://makerworld.com/en/models/1734086-bambots-arena-modular-interactive#profileId-1842166	https://makerworld.com/en/models/1420992-fracture-150g-antweight-combat-robot-cyberbrick#profileId-1476369	https://makerworld.com/en/models/1424914-interceptor-antweight-combat-robot-for-cyberbrick#profileId-1480911	https://makerworld.com/en/models/1562535-scraptor-150g-antweight-cyberbrick-combat-robot#profileId-1642308	https://makerworld.com/en/models/1693008-tanker-150g-antweight-cyberbrick-combat-robot#profileId-1794762	https://makerworld.com/en/models/1403690-cyberbrick-customizable-remote#profileId-1456183

STAY TUNED FOR MORE…