Hollow Knight: Silksong Cover Art

Boost MeBoosts help me to make more designs like this.  If you enjoy this poster, please consider giving me a comment, like, or boost! :)

“I am the silence in the song.”

Whether you’re waiting (patiently or not) for Silksong’s release, or simply love the art and lore of the Hollow Knight world, this is a bold and beautiful tribute to what's to come.

Hueforges can be resized by adjusting only the X and Y scale—leave the Z height unchanged for best results.
 
Each print is 134.2x200mm.

These prints display wonderfully with a 3d printed HueForge stand, such as the middle size shown here (as shown in the print photos):
https://makerworld.com/en/models/153050-3-collapsable-stand-sizes-hueforge-etc?from=search#profileId-167215
 
Project: Hollow Knight Silksong Cover.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 134.2x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
 

Filaments Used:

• PLA BambuLab Basic Black Transmission Distance: 0.6
• PLA BambuLab Basic Red Transmission Distance: 4
• PLA BambuLab Basic Yellow Transmission Distance: 6
• PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments
 

Swap Instructions:

• Start with BambuLab Basic Black
• At layer #8 (0.72mm) swap to  BambuLab Basic Red
• At layer #12 (1.04mm) swap to BambuLab Basic Yellow
• At layer #14 (1.2mm) swap to BambuLab Basic Jade White for the rest