Rotating Herb And Spice Rack

Rotatable herb and spice rack.

 

The rack measures 175mm in diameter and is designed with the A1 mini in mind, reaching a height of 219mm when fully assembled. It can hold up to 12 jars, each with a maximum diameter of 44mm.

 

 

Prints on 4 plates with 7 parts in total, 7 plates for the A1 Mini. It's super easy to assemble, just slots together. I haven't used any glue, and it held together just fine, but a few drops of glue wouldn't hurt. Just make sure the uprights are oriented correctly before applying glue, as the holes slant down slightly and should face inwards.

 

You will need one bearing with an inner diameter of 8mm and an outer diameter of 22mm. This one - (608-2Z SKF Shielded Deep Groove Ball Bearing 8mm inside x 22mm outside)

 

Working on a version without any bearing that is expected to be released within the next week or two.

 

 

Boost MeIf you appreciate the model, a boost would greatly help support my work.