67 Shelby GT500 Body for OpenRC F1

This Bodyshell is fit for the OpenRC F1 car.  The main support parts bolt onto the existing chassis points circled in red using 3mm x 20mm long screws.  The body then bolts onto the new supports using additional 3mm x 20mm screws.  the design was inspired by a kit card, scaled up and heavily modified to be an original new option for the awesome openrc f1 car!  there are some imperfections but when complete it still looks great and fits.  I forgot to modify the front wheel wells so you can either modify them to be a little wider towards the front of the car or just heat them and squish them, so the tires have full range of motion.  my car is using the larger Tamiya f104 tires so this issue may not affect small diameter tires.   the tail lenses will loosely fit 5mm led bulbs so you'll need to glue the bulbs and lenses into the body shell, and the front light lenses will tightly fit 5mm bulbs.  the grill is just pressed in and again glued.  the cabin is a slip fit with clearance for 10mm magnets, but I didn't end up using them.  this model was printed using the a1 mini, ankermake m5 and m5c printers.  Happy Racing