R2-D2 - Star Wars - HueForge

“R2-D2 it is you, it is you!” - C-3P0

For this print, I did use a 0.2mm Stainless Steel nozzle. The model is 69.32mm by 98mm in size or slightly bigger then a trading card. 

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm

This print uses 4 unique filaments

Swap Instructions:
    Start with PLA PolyTerra Charcoal Black (TD 0.3) or PLA BambuLab Matte Charcoal (TD 0.6)
    At layer #15 (0.68mm) swap to PLA BambuLab Matte Nardo Gray (TD 0.7)
    At layer #31 (1.32mm) swap to PLA BambuLab Matte Ivory White Gray (TD 3.5)
    At layer #40 (1.68mm) swap to PLA BambuLab Matte Marine Blue (TD 0.5) for the rest.

May the Force be with you!