Räfflad Lamp

Räfflad table lamp

17,5x17,5x23 (DxWxH)

Designed for E27 and E14 (with included adapter) threded sockets with retainingcollars.

Like this:

This model consists of 4 parts. 2 of them are printed in vase mode and 2 regularly. Unfortunately bambu studio dont let me have parts printed in vase-mode in the same print profile as the rest of the parts that needs to be printed regularly, so i created two seperate print profiles. One with the parts printed in vase-mode and one with everything else. You need to print them both for the complete lamp.

Assembly:

This part requires aprox. 30 sec of concentration. 

I found the easiest way was to squeeze out some super glue on some painterstape or cardboard and use a piece of filament to dab the glue in place on every-other ridge. You need very little glue as you can see in the gif. None of mine has come loose

Same for the base.

Then just leave for the glue to dry. I do not recomend using a activator on the super glue as it stains the filament.

ALWAYS USE LED LIGHTS!!!

Happy Printing! :)