Hueforge of Dabi from My Hero Academia

Boost MeIf you like my hueforges, please consider giving me a boost as it incentives me to make and upload more cool hueforges! Thank you!

>>>>>!!!!READ ME!!!!!<<<<< To be able to see some of my other models marked as NSFW by makerworlds automated system! You need to navigate on your web browser at the top right to ACCOUNT SETTINGS Then to PREFERENCES Then to NSFW(18+) CONTENT and Click on it and then click your preferred settings for makerworlds NSFW content viewing, Thank you friends and happy printing!!

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA PolyLite White Transmission Distance: 5
    PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #12 (1.04mm) swap to White
    At layer #21 (1.76mm) swap to Marine Blue for the rest.

 

Please share your pictures of your prints i would love to see how they came out and happy printing!!

The frames i use for ALL my hueforges are amazing and are not my own design at all and i take no credit at all, all credit for them go's to canadian gamer and they can be found here!
https://makerworld.com/en/models/1083539-desktop-hueforge-frame#profileId-1199615
 

And if i want to hang them i just super glue one of these to the back of the frame, and this is also not my design and i take no credit for it, all credit go's to the creator of the model!
https://makerworld.com/en/models/840217-wall-mount-for-hueforge#profileId-807756