P1S organizer, storage box and build plate holder

When I first got my P1S, one of the first things I wanted to print for it was a little tool box to hold all of the extra components you get with the base machine, I then ordered a hardened steel hot end and extruder set and an extra build plate, now I needed somewhere to store all of that extra stuff too!

Whilst there are a lot of models around that satisfy each of my needs individually, I decided to design my own box from scratch to meet all of them in 1 neat convenient box that securely sits on top of the P1S.

This Organizer will hold

• 3 x P1S, X1C build plates
• All included spare parts, hot end and tools that came with your printer.
• An additional complete hot end
• Spare extruder gear set
• Bambu Lab cutter stopper (allows you to utilize full 256x256x256 build volume)
• 1x small spray bottle of Isopropyl Alcohol
• + 6 additional small storage cubbies of various sizes.

The side mounts don't strictly need the screws to hold them on, but to make it more secure, it has been designed to use 2 of the extra 30mm screws you have after you set your printer up. NO HEATSET INSERTS REQUIRED!!

*NOTE*

• I don't have an AMS, so I don't know if this will fit on top of the printer if there is an AMS there as well, my guess is it will not fit. 
• If you have an X1C, I cant confirm compatibility as I don't have one to check external dimensions on. The P1S measures 390mm edge to edge, if the X1C is the same it will fit!
• The images of the printed part I have included are version 1.3. The available version 1.4 is identical except for the addition of the pocket to hold the Filament cutter plug (you can see the difference in the uploaded CAD image) I haven't printed that again yet.