Luk advertising sign for Carrera slot car

LuK Advertising / advertising sign / perimeter advertising for Carrera slot car pit lane garage scale 1:24.

This is an advertising sign for a Carerra / slot car pitlane garage.

The sign is designed for the very nice model of Shane54 on Thingiverse (https://www.thingiverse.com/thing:3467763) or the original (https://www.thingiverse.com/thing:2736785) from USNSCPO.

I resized the garage from 1:32 to 1:24 and designed these magnetic /changeable advertising sign.

See my other models for different brand advertising sign https://www.printables.com/de/@YoPrint3_760937/models.

The modell is not perfect - the holes for magnets are neither aligned to the middle nor are they in equal size.

Nevertheless just glue some magnets in them and the surface you want to mount them (take care of magnetic orientation) and you have changeable advertisement signs for your slot car racetrack.

Due to the different heights of the magnets, I recommend sticking self-adhesive metal tape where you want the signs to hang later. I used "GAUDER self-adhesive metal tape" from Amazon.

If you scale the sign down the holes for the magnets might not be big enough anymore - you either add holes by adding a negative cylinder of your magnet size in your slicer or drill them mechanically after printing.

Size of the sign is:

Length: 19cm , Hight: 4,5 cm Width: 3,5 mm (L: 7.48 in, H 1.77 in, W: 0.137 in)

Printed in PLA (Multicolor print):

0.4 Nozzle

3 wall loops

10% grid infill

No support, no brim

If you like this model please dontt forget to hit the „like“ button, if you printed it I would be curios to see your makes.

If you have questions - let me know in the comments.